Bush Washing Machine Not Draining. If your washing machine doesn't respond when you turn it on there may be a simple fix. Check the water level control.
The pump is made of a flexible material that. There may be a blockage in the drain pump filter. If you have an issue with your washing machine's spinning, you may be able to fix it yourself without the assistance of a service specialist.
First, look for any kink in the hose that could be obstructing the flow of water. Open and remove the service flap. To check for a foreign body in the pump, remove the lint.
If it has become clogged, your washing machine will stop draining, as the water cannot get past the filter. Pull the washing machine out from the wall and remove the hose clamp from the back. Another reason your machine may have stopped draining is because of an issue with the drain hose.
Check that there are no kinks in the cold water fill hose and the waste water hose by pulling the appliance out slightly and untwisting any. There may be a blockage in the drain pump filter. Gather a large flat tray, some old towels, and a few empty containers such as plastic containers.
The drain hose is responsible for carrying wastewater out of your bosch washing machine and into your household drain. Open the machine’s control panel and look for a plastic tube attached to. If you have an issue with your washing machine's spinning, you may be able to fix it yourself without the assistance of a service specialist.
The washing machine hoses are kinked or blocked. If the water runs out easily and is clear and clean, this most likely isn’t a blockage. Check the water level control.
Comments
Post a Comment